Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Select Page

Backed by expert advice

Fast UK delivery

Global shipping

Backup Generator for Wedding Venue | Copdock Hall Case Study

by | Aug 25, 2026 | Case Studies, Events, Public Sector

Backup Power for Wedding Venues – Copdock Hall & High House Weddings

The big day has come around. Everything is organised: the DJ, lighting, catering equipment, bars, refrigeration, ovens, sound systems and all the other equipment needed to keep a wedding running smoothly.

But has anyone thought about what happens if the power goes off?

This was exactly the question our customer at Copdock Hall & High House Weddings asked us.

For a wedding venue, a power cut is not just an inconvenience. There is the embarrassment and disruption for guests, but more importantly, there is the potential cost of a wedding being interrupted or even cancelled.

For a venue hosting one of the biggest days of somebody’s life, they decided it simply was not a risk worth taking.

Choosing the Right Backup Generators

After looking at the electrical requirements across the two sites, we concluded that two different-sized generators were the right solution.

The first was a Ferbo FE165 C-S-A, providing 150kVA prime power and powered by a Cummins diesel engine. You can view the equivalent 150kVA Cummins-powered Ferbo platform here: 150kVA Cummins Ferbo FE165-C.

The second was a Ferbo FE135 I-S-A, providing 120kVA prime power and powered by an FPT Iveco diesel engine. You can view the equivalent 120kVA FPT Iveco-powered Ferbo platform here: 120kVA FPT Iveco Ferbo FE135-I.

Both generators were supplied from our Ferbo Standby Select range, which is specifically configured for backup and standby power applications.

Rather than paying for equipment intended for continuous prime or rental operation that the customer did not need, the Standby Select specification gave them the important features required for reliable emergency power.

What Does a Standby Generator Need?

A standby generator can potentially sit for weeks without being required. When there is a power cut, however, you need it to start.

That is why both Ferbo generators were supplied with features including:

  • Battery charger to maintain the starter batteries
  • Water jacket heater to keep the engine ready for starting
  • Large integral fuel tank
  • Retention base for additional fluid containment
  • ABB 4-pole circuit breaker
  • Deep Sea Electronics control panel
  • Sound-attenuated weatherproof canopy

These are relatively simple details, but they are important when a generator’s job is to sit in the background and be ready when required.

If you want to understand more about how we specify Ferbo generators for standby applications, you can also read our guide on why we choose to work with Ferbo generators.

Bigger Is Not Always Better

One of the most important parts of this project was correctly sizing the generators.

It can be tempting when buying backup power to simply install the biggest generator possible. But there is little point massively oversizing a generator if the site’s electrical infrastructure is not capable of using the additional power.

We gave the customer our opinion on what they genuinely required rather than simply trying to sell them a larger generator.

Correct sizing helped reduce the initial purchase cost, but it should also help reduce unnecessary fuel consumption and running costs throughout the life of the machines.

This is something we believe is particularly important when specifying a diesel generator: more kVA is not automatically better. The generator needs to be correctly matched to the site and the application.

Two Sites, Two Different Generator Requirements

Another reason this project required some thought was that the customer needed backup power across two separate sites.

Rather than automatically supplying two identical generators, we looked at the requirements individually.

This resulted in the 150kVA Cummins-powered FE165 for one location and the smaller 120kVA FPT Iveco-powered FE135 for the other.

It meant each site received a generator better suited to its actual requirement.

Keeping the Generators Out of Sight

Then there was the question of where to put them.

Admittedly, does anyone really want to see a diesel generator when they are attending a wedding?

Probably not.

Guests do not need to see the backup power system. They just need the peace of mind that, behind the scenes, the venue has one.

The final generator locations therefore made delivery slightly more challenging, but allowed the machines to remain discreet while still being positioned where they could provide backup power to the sites.

For venues such as wedding barns, hotels and country estates, we think this is an important part of generator specification. Noise, appearance and positioning can matter almost as much as the kVA rating.

Automatic Transfer Switches and Backup Power

For a fully automatic standby installation, an Automatic Transfer Switch (ATS) can be used to detect a mains failure and transfer the electrical load to the generator.

This is particularly useful for wedding venues, hotels and other hospitality businesses where staff should not need to manually start and switch over a generator during a power cut.

Spreading the Cost with Generator Finance

We also arranged finance for one of the generators.

Rather than using a large amount of business cash flow in one hit, the customer was able to spread the cost of the generator over three years.

For commercial customers, this can make investing in backup power considerably easier to manage, particularly when the generator is essentially protecting the business against an event you hope never happens.

The Cost of Backup Power vs the Cost of a Power Cut

Hopefully, these generators will spend the vast majority of their lives doing very little.

That is actually the point.

But if Copdock Hall or High House Weddings experiences a mains failure halfway through a wedding, the generators are there to help keep the venue operating.

The DJ can keep playing. The lights can stay on. Refrigeration and catering equipment can continue operating. The bar can keep serving, and the venue can concentrate on looking after its guests.

For a wedding venue, hotel or events business, the question is not necessarily “How much does a backup generator cost?”

It can be worth asking:

“How much could one badly timed power cut cost the business?”

See Our Ferbo Generators in Action

If you want to see the generators rather than just read about them, we regularly upload Ferbo product walkarounds, running demonstrations, noise tests, factory visits and customer deliveries to our dedicated YouTube playlist.

Watch our Ferbo Generator Video Library on YouTube →

Backup Generators for Wedding Venues, Hotels and Events Businesses

At Target Power Generators, we supply backup diesel generator systems for wedding venues, hotels, restaurants, events businesses and other commercial premises throughout the UK.

We can help with the complete process, including generator sizing, standby generator selection, ATS systems, fuel tanks, delivery, installation support, commissioning, finance and ongoing generator servicing and maintenance.

Our Ferbo Standby Select range is specifically configured for standby applications, with models available across a wide range of power outputs and engine manufacturers.

You can also browse our wider Ferbo diesel generator range or find out more about our wider generator installation and power services.

If you are unsure what size backup generator your venue actually needs, speak to our technical team before simply buying the biggest machine available. We can look at the site’s electrical supply and load requirements and help specify a generator that makes sense for the application.

Read more

Proud to be 5 star rated

Need help? Get in touch

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.