Mobile Diesel Generator for EV Charging – Acumen Automotive Ltd
Supplying a diesel generator to a customer who needs it to power electric vehicles might sound like a bit of a contrast.
But for Acumen Automotive Ltd, it made complete sense.
Many of their sites are effectively large vehicle storage compounds and car parks. Installing a permanent mains electricity supply at every location simply would not be practical or cost-effective, particularly when the requirement is mainly to put enough charge into an EV to move it around site, onto a transporter or into the showroom.
They needed a reliable, mobile power solution that could move with the operation.
Who Are Acumen Automotive?
Acumen Automotive are one of the UK’s major vehicle logistics and EV preparation businesses, storing, preparing and delivering vehicles throughout the country.
With large numbers of electric vehicles passing through their sites, they needed a straightforward way of providing temporary EV charging where a suitable mains supply was not available.
What Size Generator Was Required?
After discussing the application, we supplied a 16.5kVA single-phase Ferbo diesel generator powered by a Yanmar engine.
The generator was supplied in a low-noise acoustic canopy and mounted onto a Knott 1300kg road trailer, giving the customer a genuinely mobile charging solution that could be moved around the site or transferred to another location when required.
The generator was also equipped with a 63A single-phase socket, which we supplied with a splitter to provide 2 x 32A single-phase outlets.
This allowed the customer to connect two EV charging points at the same time.
Why Only Charge Two Electric Vehicles at Once?
You might reasonably ask why a company handling large numbers of electric vehicles only needed to charge two at once.
The answer is that these vehicles do not normally need to be fully charged.
They simply need enough energy to allow them to be moved around the compound, driven onto the vehicle transporter and then moved again when they arrive at the dealership or final destination.
It is therefore more of a continuous chain: one vehicle receives enough charge to move, another takes its place, and the process continues throughout the working day.
For this application, a correctly sized 16.5kVA generator made far more sense than installing a substantially larger machine that the customer simply did not need.
Why Did Acumen Choose Target Power?
One of the main reasons was availability.
Because we keep generators, Ferbo diesel generators, road trailers and electrical accessories in stock, we were able to configure and turn the complete generator package around in just two days.
The customer also wanted a premium product.
This generator was going to become an important source of power for the vehicle operation on site, so reliability mattered. Downtime would mean vehicles could not be charged sufficiently to move through the logistics process.
The Yanmar-powered Ferbo was therefore a good fit: compact, fuel efficient, straightforward to service and easy to transport.
A Mobile Generator Package
Mounting the generator onto a Knott road trailer made the complete package much more flexible.
Rather than permanently installing the generator in one position, the customer can move it around the vehicle compound and position it close to wherever charging is required.
This type of package can also work well for construction, agriculture, events and other temporary-power applications where the point of use regularly changes.
You can explore our wider Ferbo generator range or speak to us about trailer-mounted generator configurations to suit a specific application.
We Did Have One Technical Challenge
It was not completely plain sailing.
When the first generator arrived on site, the customer found that the EV charging equipment would operate, but they were struggling to take advantage of the output the generator was capable of providing.
After discussing the installation and working through the setup, the issue was traced to the earthing arrangement being used with the charging equipment.
Once the correct site-specific earthing arrangement was implemented, including the required earth electrode for that installation, the EV charging equipment was able to operate as intended.
This is an important point with EV charging from a generator. It is not simply a case of plugging any EV charger into any generator. The generator earthing arrangement, charger requirements and electrical protection all need to be considered together and should be checked by a suitably competent electrical person.
What We Learnt from the First Generator
For us, this is where after-sales support becomes important.
Anybody can deliver a generator.
The real test comes when the customer has a question or something does not behave exactly as expected on site.
By working through the issue with Acumen, we understood exactly what the charging equipment required. That meant when the customer ordered a second generator for another site, we could implement what we had learnt from the first installation straight away.
The second generator was supplied to the same specification and has been operating successfully since.
300 Hours and Approaching Its First Service
The original generator has now completed approximately 300 operating hours since delivery.
It is therefore approaching its first scheduled service, for which we will be supplying genuine Yanmar service parts.
This is another reason we like using established engine manufacturers on generators that are expected to work regularly. Service parts are identifiable, available and the engine has a recognised maintenance schedule.
Regular servicing is particularly important on prime-running generators because oil, filters, belts and other service items have a direct impact on long-term reliability.
A Second Generator Is Usually a Good Review
Probably the strongest feedback from this project is that Acumen subsequently ordered another generator for a second site.
The same basic package worked:
- 16.5kVA single-phase output
- Yanmar-powered Ferbo generator
- Low-noise acoustic canopy
- Knott 1300kg road trailer
- 63A single-phase outlet
- Splitter to 2 x 32A outlets
- Mobile configuration for use around the vehicle storage site
Sometimes that tells you more than anything we can put in a brochure. You can view the Ferbo 230v FE22-Y-M 16.5kVA Mobile Diesel Generator here.
Diesel Generators for EV Charging
A diesel generator would not normally be our first recommendation where a suitable mains supply is readily available.
But for temporary sites, vehicle compounds, remote locations and operations where the cost of bringing in a permanent electrical supply is disproportionate to the requirement, a correctly specified generator can provide a practical solution.
The important part is sizing the generator around the actual charging requirement and making sure the electrical and earthing arrangement is suitable for the EV charging equipment being used.
At Target Power Generators, we can help specify diesel generators, trailers, socket configurations, distribution equipment and supporting accessories for temporary and off-grid power applications.
See Ferbo Generators in Action
We regularly upload Ferbo generator walkarounds, running demonstrations, customer deliveries, noise tests and technical videos to our dedicated YouTube playlist.
Explore our Ferbo Generator Video Library on YouTube →
Need a Mobile or Off-Grid Power Solution?
If you need power for an EV compound, construction site, agricultural operation or another location where installing mains electricity is difficult or expensive, speak to our team.
We can help work out the actual electrical requirement rather than simply supplying the largest generator possible, and configure the generator with the correct sockets, trailer and supporting equipment for the application.

